Moving Head 60w LED med alle funksjoner du kan forvente deg!

Moving Head 60w LED med alle funksjoner du kan forvente deg!

Moving Head fra Marq, den har en klar og fin lystråle. Denne er perfekt der du ikke har råd til å leie de litt dyrere moving head du får på markedet, men du mister faktisk ikke funksjonene selv om du da velger denne. Du får klare og flotte goboer fra Gesture Spot 300 med sin 60W LED-lampe og brukervennlig manuell fokusoperasjon. En flyttbar gobo-dør gjør det enkelt å bytte ut goboer uten å kreve ekstra verktøy, og fargemenyen gir all viktig informasjon raskt og tydelig. Så trenger du en firme logo på veggen eller til din fest, så kan vi lage denne logoen for deg.

Tekniskespesifikasjoner:

60W LED
Manuell fokus for skarpe, klare goboer
Bytt gobos uten ekstra verktøy gjennom avtagbar gobo-dør
4 slavemoduser oppretter komplekse automatiske programmer uten DMX-kontroller
Manuelle valg gjør det mulig å stikke en kake eller projisere en gobo uten DMX-kontroller
Fullfargemeny: Lettlest, detaljert menysystem
¼-sving monteringsbrakett inkludert for raskere oppsett mellom show
SPESIFIKASJONER
DMX-kanaler: 7 eller 13
DMX-kontakter: 3-polet DMX inn / ut
Pan og Tilt: 540 ° / 270 °
Pan- og Tilt Ranges: 540 °, 360 °, 180 ° pan / 270 °, 180 °, 90 ° tilt
Farger: 8 + hvite, splitte farger, rulling
Gobos: 7 + åpen, slot-n-lås utskiftbar, med rotasjon, indeksering, gobo shake & scrolling
Gobo Størrelse: 23,5 mm ute, 19 mm bilde, 1,1 mm maks tykkelse
Prism: 3 fasett
Lyskilde: 60 W hvit LED
Bredde: 18 °
Lysstyrke: 3.700 lux @ 3M
Inngangsspenning: 100 til 240 VAC, 50/60 Hz (automatisk veksling)
Montering: 1/4 omdreining, Omega Clamp Inkludert
Fokus: Manuell
Strobe Rate: 0 til 20Hz + puls og tilfeldig
Strøm og strøm: 84W, 12V 7A @ 230V, 50Hz – 72W, 36V 2A @ 230V, 50Hz
Vekt: 5,6KG / 6,8KG – 12,4 lbs
Størrelse: 330mm x 240mm x 220mm
Godkjenninger: CE & FCC

Manual

Du kan laste ned følgende dokumenter her: Bruksanvisning til Marq 300 Hvordan skifter du logo på Marq 300? Safety Notes Important: In addition to the notes below, please refer to the included safety & warranty manual for additional safety information. • Carry this product by the hanging/mounting bracket or the handles only. • Use this product indoors only (IP20). To prevent risk of fire or shock, do not expose this product to rain or moisture. • Do not use this product for permanent installations. • Connect this product to grounded and protected circuits only. • Always disconnect it from its power source before cleaning or replacing this product’s fuse. Replace the fuse with another of the same type and rating. • Before connecting the product to a power source, make sure the power cable is not crimped or damaged. • Make sure the power outlet’s voltage is within the range stated on this product (on its housing or decal). • Never connect this product to a dimmer or rheostat. • Never disconnect this product from the power cable by pulling or tugging on the cable itself. • If you mount this product overhead, use a safety cable. • Always make sure this product is used in a location with adequate ventilation with at least 20” (50cm) from adjacent surfaces. Make sure none of this product’s ventilation slots are obstructed. • Do not use this product at ambient temperatures higher than 104 °F / 40 °C. • Do not allow flammable materials near this product during use. • Do not look at the light source when the product is on. • Do not touch this product while it is powered on or immediately after powering it off. The product and its housing can reach high temperatures. • If you encounter a serious problem while using this product, stop using it immediately. • Do not open this product’s housing. It contains no user-serviceable parts and will void your warranty. • If the lens, shield lens, or ultraviolet screen becomes cracked, scratched, or otherwise damaged, stop using it immediately. Contact Marq technical support for service and repair information. 4 Features Rear Panel 1. Power In: Use a standard power cable (included) to connect this input to a power outlet. 2. Fuse: This compartment holds the fuse. Before cleaning or replacing the fuse, disconnect Gesture Spot 300 from its power source. Use a screwdriver or other tool to remove the compartment (do not pull it out by the tab only). Replace the fuse only with a new fuse with the same rating (250 V, 4 A). 3. DMX In: Use a standard 3-pin DMX cable to connect this input (A) to your DMX controller or (B) to another fixture that will pass DMX data through it to this one. Gesture Spot 300 receives DMX data over this connection. Please see Setup > Linking > DMX for information about linking multiple fixtures. 4. DMX Out: Use a standard 3-pin DMX cable to connect this output to an additional fixture. Gesture Spot 300 sends its data to an additional fixture over this connection. Please see Setup > Linking > DMX for information about linking multiple fixtures. Front Panel 5. Display: This display shows messages and values indicating the fixture’s current status. 6. Menu: Press this button to access Gesture Spot 300’s menu. 7. Up: Press this button to select the nexthighest menu option or to increase the value by 1. 8. Down: Press this button to select the next-lowest menu option or to decrease the value by 1. 9. Enter: Press this to confirm your current selection or value. 10. DMX: This light will illuminate when Gesture Spot 300 is receiving DMX data properly through its DMX In. 11. Error: This light will illuminate when Gesture Spot 300 receives an invalid DMX command. 5 6 7 8 9 10 11 1 2 3 4 5 Setup Note: Items not listed under the Introduction > Box Contents are sold separately. Power Information Before connecting the fixture to a power outlet, make sure the power cable is not crimped or damaged. Also, make sure the power outlet’s voltage is within the range stated on this product (on its housing or decal). Before cleaning or replacing the fuse, disconnect Gesture Spot 300 from its power source. Use a screwdriver or other tool to remove the compartment (do not pull it out by the tab only). Replace the fuse only with a new fuse with the same rating (250 V, 4 A). Mounting/Rigging Standing Place the fixture on a flat, stable surface. Make sure all cables are secured and placed so that no one will trip over them. Suspended 1 3 4 5 2 Clamp (not included) Hanging Bracket 1/4-turn 1/4-turn Follow these steps to use the hanging bracket (included) for mounting the fixture to a truss. (tighten until secure) 6 Follow these steps to use a safety cable (not included) to secure the fixture to a truss. We recommend using a safety cable with a diameter of at least 5 mm and a load capacity of at least 149 lbs. (67 kg). Linking When using multiple Gesture Spot 300 fixtures, you can link (“daisy-chain”) them so that each each fixture sends DMX data to the next one. This helps reduce clutter in your cabling and save you setup time. DMX Use a standard 3-pin DMX cable to connect the DMX Out of one fixture to the DMX In of another. Your connected DMX controller will send its data to the fixtures in sequence. All fixtures in this chain will receive all DMX data. DMX Controller Gesture Spot 300 Gesture Spot 300 Gesture Spot 300 1 2 3 7 Gobo Replacement To replace a gobo: 1. Power the fixture off. On the top of the fixture, press the gobo compartment door downward and slide it off. 2. In the compartment, turn the gobo wheel to find the one you want to replace. 3. Gently pull the gobo and its holder away from the gobo wheel so it “unlocks” from the wheel, and then pull it upward to remove it from the slot. 4. Remove the gobo from its holder by carefully removing the retention ring (this may require breaking the white glue points), and replace the desired gobo. Make sure the retention ring locks into the groove to ensure the gobo is secured in the holder. 5. Gently reinsert the gobo holder into the slot, and then push it into the wheel to “lock” it back in its position. 6. Optional: To replace more gobos, repeat Steps 3–6. 7. Align the gobo compartment door with the opening (matching the flat and arched sides of the door with their respective edges), and then slide it back on. Make sure it “locks” securely to its original position. 1 3 4 5 2 8 Operation Menu Options Menu Submenu Settings/Values Description DMX Function DMX Address 001–512 DMX address setting Channel Mode 13Ch 13-channel operation 7Ch 7-channel operation No DMX Signal Keep When no DMX signal, do nothing (hold) Auto When no DMX signal, enter Run Mode Clear When no DMX signal, black out DMX Monitor View values received on DMX channels Auto Movement Run Mode See Description DMX, Sound, Random, 8 auto movement programs Sound Active On, Off Sound activation Sound Sense 000–100 Sound-activation microphone sensitivity, low (000) to high (255) Slave Mode Slav 1–4 4 slave modes Manual Test Pan 000–255 Pan angle, 0° (000) to 540° (255) Pan Fine 000–255 Fine control of panning Tilt 000–255 Tilt angle, 0° (000) to 270° (255) Tilt Fine 000–255 Fine control of tilting Pan/Tilt Time 000–255 Pan/tilt speed, fast (000) to slow (255) Dimmer 000–255 Dimmer, dark (000) to bright (255) Stop/Strobe 000–255 Shutter (see 13-Channel Operation > Channel 7) Color 000–255 Color options (see 13-Channel Operation > Channel 8) Gobo Change 000–255 Gobo options (see 13-Channel Operation > Channel 9) Gobo Rotation 000–255 Rotation, slow (000) to fast (255) Prism Insertion 000–255 3-facet prism Macro Function 000–255 Macro functions (see 13-Channel Operation > Channel 12) Ctrl Functions 000–255 Blackout & reset functions (see 13-Channel Operation > Channel 13) Fixture Settings Pan Limit 540˚, 360˚, 180˚ Select range of pan angle: 540°, 360°, or 180° Tilt Limit 270˚, 180˚, 90˚ Select range of tilt angle: 270°, 180°, or 90° Invert Pan On, Off Invert pan direction Invert Tilt On, Off Invert tilt direction Swap Pan-Tilt On, Off Switch pan and tilt Pan-Tilt Correction On, Off Correct pan and tilt Load Default All OK, Cancel Restore default pan and tilt settings 9 Menu Options (continued) Display Settings Inverse  Invert control panel’s display Auto-Off On, Off Automatically turn off display when not in use Fixture Information Firmware Currently installed firmware version Total Use Hours Total running time (HHHHH:MM) Current Use Hours Current use running time (HHHHH:MM) Offset Calibration Pan Calibration -128 – +127 Offset for pan value Tilt Calibration -128 – +127 Offset for tilt value Color Calibration -128 – +127 Offset for color value Gobo Calibration -128 – +127 Offset for gobo value Gobo Rot. Calibration -128 – +127 Offset for gobo rotation value Prism Insertion -128 – +127 Offset for prism value Reset All OK, Cancel Restore all default settings DMX Functions You can control Gesture Spot 300 by linking it to a DMX controller. See below for charts of available functions. 13-Channel Operation Channel Function Value Description 1 Pan 000–255 Pan angle, 0° (000) to 540° (255) 2 Pan Fine 000–255 Fine control of panning 3 Tilt 000–255 Tilt angle, 0° (000) to 270° (255) 4 Tilt Fine 000–255 Fine control of tilting 5 Pan/Tilt Speed 000–255 Pan/tilt speed, fast (000) to slow (255) 6 Dimmer 000–255 Dimmer, dark (000) to bright (255) 7 Shutter 000–003 Closed 004–007 Open 008–076 Strobe, slow (008) to fast (076) 077–145 Pulse, slow (077) to fast (145) 146–215 Random strobe, slow (146) to fast (215) 216–255 Open 10 13-Channel Operation (continued) Channel Function Value Description 8 Color Wheel 000–006 White 007–013 Red 014–020 Orange 021–027 Green 028–034 Light Blue 035–041 Purple 042–048 Yellow 049–055 Blue 056–063 Pink 064–127 Color indexing 128–189 Clockwise, fast (128) to slow (189) 190–193 Stop 194–255 Counterclockwise, slow (194) to fast (255) 9 Gobo Wheel See Appendix > Technical Specifications > Gobos to view gobo patterns. 000–007 Open/white 008–015 Gobo 1 016–023 Gobo 2 024–031 Gobo 3 032–039 Gobo 4 040–047 Gobo 5 048–055 Gobo 6 056–063 Gobo 7 064–071 Open spot shaking, slow (064) to fast (071) 072–079 Gobo 1 shaking, slow (072) to fast (079) 080–087 Gobo 2 shaking, slow (080) to fast (087) 088–095 Gobo 3 shaking, slow (088) to fast (095) 096–103 Gobo 4 shaking, slow (096) to fast (103) 104–111 Gobo 5 shaking, slow (104) to fast (111) 112–119 Gobo 6 shaking, slow (112) to fast (119) 120–127 Gobo 7 shaking, slow (120) to fast (127) 128–189 Counterclockwise gobo change, fast (128) to slow (189) 190–193 Stop at current position 194–255 Clockwise gobo change, slow (194) to fast (255) 10 Gobo Rotation 000–127 Indexed position, 0° (000) to 360° (127) 128–189 Counterclockwise gobo scroll, fast (128) to slow (189) 190–193 Stop at current position 194–255 Clockwise gobo scroll, slow (194) to fast (255) 11 Prism 000–127 No function 128–255 Prism effect 11 13-Channel Operation (continued) Channel Function Value Description 12 Macro Functions 000–007 No function 008–023 Automatic movement 1 024–039 Automatic movement 2 040–055 Automatic movement 3 056–071 Automatic movement 4 072–087 Automatic movement 5 088–103 Automatic movement 6 104–119 Automatic movement 7 120–135 Automatic movement 8 136–151 Sound-active movement 1 152–167 Sound-active movement 2 168–183 Sound-active movement 3 184–199 Sound-active movement 4 200–215 Sound-active movement 5 216–231 Sound-active movement 6 232–247 Sound-active movement 7 248–255 Sound-active movement 8 13 Control Functions All functions are executed after 2 seconds. 000–049 No function 050–059 Blackout during pan/tilt or color/gobo change 060–069 Disable blackout during pan/tilt or color/gobo change 070–079 Blackout during pan/tilt 080–089 Disable blackout during pan/tilt 090–099 Blackout during color change 100–109 Disable blackout during color change 110–119 Blackout during gobo change 120–129 Disable blackout during gobo change 130–139 No function 140–149 Reset pan/tilt 150–169 Reset color/gobo/prism 170–199 No function 200–209 Reset all 210–255 No function 12 7-Channel Operation Channel Function Value Description 1 Pan 000–255 Pan angle, 0° (000) to 540° (255) 2 Tilt 000–255 Tilt angle, 0° (000) to 270° (255) 3 Shutter 000–003 Closed 004–007 Open 008–076 Strobe, slow (008) to fast (076) 077–145 Pulse, slow (077) to fast (145) 146–215 Random strobe, slow (146) to fast (215) 216–255 Open 4 Color Wheel 000–006 White 007–013 Red 014–020 Orange 021–027 Green 028–034 Light Blue 035–041 Purple 042–048 Yellow 049–055 Blue 056–063 Pink 064–127 Color indexing 128–189 Clockwise, fast (128) to slow (189) 190–193 Stop 194–255 Counterclockwise , slow (194) to fast (255) 5 Gobo Wheel See Appendix > Technical Specifications > Gobos to view gobo patterns. 000–007 Open/white 008–015 Gobo 1 016–023 Gobo 2 024–031 Gobo 3 032–039 Gobo 4 040–047 Gobo 5 048–055 Gobo 6 056- 063 Gobo 7 064–071 Open spot shaking, slow (064) to fast (071) 072–079 Gobo 1 shaking, slow (072) to fast (079) 080–087 Gobo 2 shaking, slow (080) to fast (087) 088–095 Gobo 3 shaking, slow (088) to fast (095) 096–103 Gobo 4 shaking, slow (096) to fast (103) 104–111 Gobo 5 shaking, slow (104) to fast (111) 112–119 Gobo 6 shaking, slow (112) to fast (119) 120–127 Gobo 7 shaking, slow (120) to fast (127) 128–189 Counterclockwise gobo change, fast (128) to slow (189) 190–193 Stop at current position 194–255 Clockwise gobo change, slow (194) to fast (255) 6 Gobo Rotation 000–127 Indexed position, 0° (000) to 360° (127) 128–189 Counterclockwise gobo scroll, fast (128) to slow (189) 190–193 Stop at current position 194–255 Clockwise gobo scroll, slow (194) to fast (255) 7 Prism 000–127 No function 128–255 Prism effect